Polytechnic University of Puerto Rico Back to Pupr.edu Structural Transportation Geotechnical Environmental Construction
  • Environmental Engineering : Undergraduate Program
  • Program Description
  • The Environmental Engineering Program leads to the Bachelor of Science degree in Environmental Engineering. The program offers knowledge in environmental engineering subjects that will allow the students to understand and subsequently acquire additional knowledge in their specialized areas of interest, according to personal inclination and available opportunities. Throughout the curriculum the student develops the ability to apply pertinent knowledge to the practice of engineering design in the major discipline areas of environmental engineering. The program includes courses in the fields of water supply engineering, wastewater engineering, groundwater pollution control, air pollution control, solid and hazardous waste management, occupational safety and health, environmental impact assessment, environmental toxicology, and pollution prevention engineering. Elective courses in the specialization component are also offered. The engineering design experience is built upon the fundamental concepts of mathematics, basic sciences, engineering sciences, and the humanistic and social sciences. This will provide environmental engineers a healthy self-image, a well-rounded knowledge of their role in society, the ability to communicate, and to develop their creativity to apply engineering design with originality.

    The graduates of the Bachelor of Science in Environmental Engineering Program will have the theoretical and conceptual knowledge, the capability to use modern technologies effectively, and the basic technical skills to successfully work as engineers, to pursue graduate studies, to become engineers in training, and to continue their professional development and education on their way to become practicing professional civil engineers with a sense of social responsibility.
  • Environmental Engineering : Undergraduate Program
  • Degree Offered
  • The Civil and Environmental Engineering Department offers undergraduate instruction leading to the degree of Bachelor of Science in Environmental Engineering (B.S.Env.E.).

  • Environmental Engineering : Undergraduate Program
  • Mission
  • The mission of the Environmental Engineering Program is to prepare and motivate students from diverse backgrounds to achieve excellence through intellectual, humanistic, scientific, and technological advancements on their way to becoming practicing professional environmental engineers with a sense of social responsibility.
  • Environmental Engineering : Undergraduate Program
  • Objectives
  • Within a few years of graduation, the PUPR Environmental Engineering Program graduates are expected to attain the following:
    1. Establish themselves as practicing professionals in the industry and government of their communities in accordance with the standards and ethics of the profession.
    2. Demonstrate professional competence by holding positions of increasing responsibility in an environmental engineering field.
    3. Contribute to their organizations by serving as liaisons in a bilingual (Spanish-English) environment, performing as effective leaders and as active members of a professional team.
    4. Enhance their professional knowledge through a lifetime of continuing education and through the active participation in professional societies.
  • Environmental Engineering : Undergraduate Program
  • Outcomes
  • The graduates of the Environmental Engineering Program will have:
    • An ability to apply knowledge of mathematics, probability and statistics, science, and engineering.
    • An ability to conduct laboratory experiments and to critically analyze and interpret data in a minimum of two of the following areas: water supply, wastewater management, air pollution control, and solid waste management.
    • Proficiency to analyze and design systems, components, or processes in a minimum of three of the following areas: water resources engineering, water supply engineering, wastewater engineering, air pollution control, solid waste management, hazardous waste management, occupational safety and health, environmental toxicology, and environmental impact assessment.
    • An ability to work in teams and to interact with professionals of other disciplines.
    • An ability to identify, formulate, and solve environmental engineering problems.
    • A comprehension of ethical principles, professional practice issues, and the roles and responsibilities of public institutions and private organizations in environmental management.
    • An ability to communicate orally, in writing, and graphically in an effective way.
    • An ability to evaluate the impact that design alternatives will have on society.
    • An ability to learn independently and an awareness of the need to be engaged in continuing education.
    • A knowledge of contemporary issues related to the environmental engineering practice.
    • An ability to model environmental engineering problems and to interpret results through the use of modern technologies.
  • Environmental Engineering : Undergraduate Program
  • Curriculum
  • Environmental Engineering Curriculum
  • Environmental Engineering : Undergraduate Program
  • Graduation Requirements
  • The Civil and Environmental Engineering Department offers undergraduate instruction leading to the degree of Bachelor of Science in Environmental Engineering (B.S.Env.E.). To obtain the degree the student must complete the following minimum requirements:

    MINIMUM GRADUATION REQUIREMENTS

    15 Credit-hours in Mathematics
    26 Credit-hours in Basic Sciences
    21 Credit-hours in Socio-humanistic Studies and Languages
    13 Credit-hours in General Engineering
    17 Credit-hours in Civil and Environmental Engineering
    49 Credit-hours in Environmental Engineering
    6 Credit-hours in Technical Electives
    147 Total Credit-hours

    PREPARATORY STUDIES

    All students that are admitted to the Environmental Engineering Program must show evidence that they have acquired the academic abilities and skills necessary to progress through this major. Those not demonstrating the complete acquisition of these abilities and skills (as reflected by the results of their College Entrance Examination Board tests, results in P.U.P.R.s placement test, previous university experience, and other tests or criteria) will be required to take preparatory courses. These courses are designed to help the students overcome deficiencies in languages, mathematics and science. These preparatory courses are in addition to the 147 credit-hours of the Environmental Engineering Program. The preparatory courses are the following:

    PREPARATORY STUDIES COMPONENT (MAXIMUM OF 37 CREDIT-HOURS)

    COURSE TITLE CREDIT-HOURS
    MATH 0102 Preparatory Mathematics 3
    MATH 0106 Elementary Algebra 3
    MATH 0110 Intermediate Algebra 3
    MATH 1330 Precalculus I 3
    MATH 1340 Precalculus II 3
    SCIE 0110 Introduction to Physics 3
    ATUL 0100 Adjustment to University Life 3
    ENGL 0100 Preparatory English 3
    ENGL 0110 English Grammar 3
    SPAN 0100 Preparatory Spanish 3
    SPAN 0110 Spanish Grammar 3
    SCIE 1110 General Biology (*) 4
    SCIE 1111 General Biology Laboratory (*) 0

    (*) To be taken by students who have not taken a Biology course in High School.
  • Environmental Engineering : Undergraduate Program
  • Course Description

  • CIVIL AND ENVIRONMENTAL ENGINEERING COURSES


    CEE 1010 - ENGINEERING GRAPHICS FOR CIVIL AND ENVIRONMENTAL ENGINEERS
    Four credit-hours. Two-two and half hour lecture periods per week.
    Pre-requisite: None

    An introduction to the field of engineering graphics and descriptive geometry as a design and documentation tool. Topics include orthographic projection, pictorial drawings, dimensioning, feature control symbols, and tolerancing. Use of a computer aided design (CAD) system to create engineering drawings.

    CEE 1012 - ADVANCED AUTOCAD FOR CIVIL AND ENVIRONMENTAL ENGINEERS
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: CEE 1010

    Introduction to the knowledge of graphical vocabulary for the preparation of construction documents, including the technical specifications and their development by computer assisted tools. The topics include AutoCAD used as tool for the preparation of civil engineering construction documents. Use of tridimensional drawings using Sketchup and Civil 3D in the development of grading and presentation technics. Includes the evaluation of technical specifications for the civil engineering area and the relation with the drawings.

    CEE 2110 - ENGINEERING GEOLOGY
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: SCIE 1210 or SCIE 1214

    Evolution of geology principles through history. The rock cycle. Mineral characteristics and rock formations. Rock types. Rock characteristics and engineering issues. Volcanism. Plate tectonics. Soil formation. Rock weathering. Mass movements. Seismology. Structural geology. Overview of the hydrological cycle. The relation of surface and groundwater hydrology to engineering geology.

    CEE 2210 - PROBABILITY AND STATISTICS FOR CIVIL AND ENVIRONMENTAL ENGINEERS
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: MATH 1370, and CE 1011 or ENVE 1011

    An introduction to the role of probability and statistics in civil and environmental engineering. Fundamentals of probability theory. Random variables. Probability distributions. Functions of random variables. Sampling. Hypothesis testing and confidence intervals. Regression and correlation analysis.

    CEE 2310 - ALGORITHMS, PROGRAMMING, AND NUMERICAL ANALYSIS
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: MATH 2350 and CEE 2210

    An introduction to programming and algorithms applied to numerical analysis. The most commonly used numerical methods in civil and environmental engineering practice are introduced. Roots of equations, systems of linear equations, curve fitting techniques, numerical differentiation and integration, and ordinary differential equations.

    CEE 2311 - ALGORITHMS, PROGRAMMING, AND NUMERICAL ANALYSIS LABORATORY
    One credit-hour. Two two-hour lecture and laboratory periods per week.
    Pre-requisites: MATH 2350 and CEE 2210
    Co-requisite: CEE 2310

    An introduction to programming and algorithms applied to numerical analysis. Programming of numerical methods commonly used in civil and environmental engineering practice, using Visual Basic for Applications within Excel as the programming environment.

    CEE 3410 - WATER RESOURCES AND HYDRAULIC ENGINEERING
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: ENGI 2420, ENGI 2421, CEE 2310, and CEE 2311

    Fundamental concepts of hydrology and hydraulics. Hydrologic processes and the elements of the hydrologic cycle. Rainfall-runoff relationship. Hydrograph and unit hydrograph theory. Frequency analysis. Design of storm sewer systems. Reservoir: yield, capacity, and sedimentation. Open channel flow. Performance and design of culverts. Groundwater hydrology concepts. Well hydraulics.

    CEE 5002 - CIVIL AND ENVIRONMENTAL ENGINEERING PRACTICE
    Three credit-hours. By agreement.
    Pre-requisite: Approval of the Department Head

    Civil and environmental engineering design procedures are applied to the solution of problems under the supervision of a non-faculty member. The problem may deal with any of the fields of civil and environmental engineering, as determined by the instructor.

    CEE 5020 - ENVIRONMENTAL LAWS AND REGULATIONS
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: CE 4440 or ENVE 4610

    Introduction to the technical, economic, political, administrative, and social forces that influence the environmental quality regulations and the use of natural resources. Review of federal and state laws, regulations, and programs enacted to minimize air, land, and water pollution. Review of public participation mechanisms.

    CEE 5030 - ADVANCED HYDRAULICS
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: CEE 3410

    Advanced hydraulics for the design and analysis of systems concerned with the use and control of water, storage, water transmission; design of open channels and pressure conduits. Design of storm and sewer systems. Performance and design of culverts. Sediment transport and sedimentation in reservoirs. Groundwater hydraulics and well hydraulics.

    CEE 5050 - CIVIL AND ENVIRONMENTAL ENGINEERING UNDERGRADUATE RESEARCH
    Three credit-hours. One four-hour lecture period per week.
    Pre-requisite: Approval of the Department Head

    Introduction to research methodologies including: title and objectives development, literature review, research justification, experiment or analytical design, and proposal preparation. Open-ended research project in a specific area of Civil and Environmental Engineering.

    CEE 5052 - CIVIL AND ENVIRONMENTAL ENGINEERING UNDERGRADUATE RESEARCH II
    Three credit-hours. One four-hour lecture period per week.
    Pre-requisite: CEE 5050

    Continuation of the research project started in CEE 5050. Detailed literature review. Research cost estimates. Application of probability and statistics. Selection of instrumentation and tests. Experimentation or analytical development. Results manipulation and evaluation. Development of scientific publication and report presentation.

    CEE 5090 - SPECIAL TOPICS IN CIVIL AND ENVIRONMENTAL ENGINEERING
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: According to special topics to be covered.

    Special topics in any of the areas of specialization in civil engineering (structural engineering, geotechnical engineering, transportation engineering, water resources engineering, and construction engineering), environmental engineering (water supply engineering, wastewater engineering, air pollution control, solid and hazardous waste management, occupational safety and health, environmental toxicology, environmental impact assessment, and pollution prevention engineering), or related fields relevant to engineering practice.


    ENVIRONMENTAL ENGINNERING COURSES


    ENVE 1011 - INTRODUCTION TO ENVIRONMENTAL ENGINEERING
    One credit-hour. Two two-hour lecture and laboratory periods per week.
    Pre-requisites: MATH 1350, SCIE 1214, SCIE 1215, and CEE 1010

    An introduction to the environmental engineering field, presenting to the students a historical background on the profession, as well as basic knowledge on environmental impacts on the atmosphere, soil, and water, and the mitigation technologies available for the environmental engineer. The course includes laboratory activities to illustrate distinct monitoring techniques for impact and compliance assessment, as well as field visits to water and wastewater treatment plants and to solid waste handling facilities.

    ENVE 3010 - ENVIRONMENTAL ENGINEERING OPERATIONS AND PROCESSES
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: SCIE 1230, SCIE 2110, ENGI 2430, CEE 2210, and ENVE 1011

    This course presents to the students an interface between the scientific knowledge acquired in previous courses and their applications in environmental unit processes and operations, specifically to physical and chemical operations and processes.

    ENVE 3110 - ENVIRONMENTAL TOXICOLOGY
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: SCIE 1230, SCIE 2110, and ENGI 2430

    Nature, sources, pathways of toxic substances in the environment and their impact on humans and other life forms. Biochemical Mechanisms of toxicity. Cellular mechanisms of environmental causes of disease. Dose-Response relationships. Xenobiotic metabolism. Phase I and Phase II Reactions. Biodegradation and Bioaccumulation. Quantitative toxicology.

    ENVE 3210 - FUNDAMENTALS OF AIR POLLUTION
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: ENVE 3010 and ENVE 3110

    Definition and general listing of air pollutants. Sources and effects of air pollutants. Federal legislation and regulatory trends. Meteorology. Dispersion of pollutants in the atmosphere. General control methods for particulate matter, gases, and vapors, sulfur oxides, nitrogen oxides and trace metals. Atmospheric photochemical reactions: ozone formation and smog. Emission standards for mobile sources. General odor control methods.

    ENVE 3220 - AIR POLLUTION CONTROL DESIGN
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: ENVE 3210

    Engineering principles applied to the solution of air pollution problems. Characteristics and design considerations: a) incinerators for control of VOC emissions, b) fixed bed absorbers, c) flue gas desulphurization systems, d) systems for the control of nitrogen oxides, e) cyclonic devices, f) electrostatic precipitators, and g) fabric filters. Cost estimation methodology in air pollution control.

    ENVE 3310 - SOLID WASTE MANAGEMENT
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: ENVE 3010 and ENVE 3110

    Sources, types, composition, and properties of municipal solid waste. Solid Waste generation and collection. Disposal of Solid Wastes; the landfill method. Design, operation, and closure of landfills. Control of gases and leachate in landfills. Materials separation and processing technologies. Thermal, biological, and chemical conversion technologies. Recycling of materials found in municipal solid wastes. Solid waste management and planning issues.

    ENVE 3320 - HAZARDOUS WASTE MANAGEMENT
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: ENVE 3310

    Definitions and characterization of hazardous wastes. Environmental legislation: TSCA, RCRA and CERCLA. Site Assessment. Partitioning, sorption, and exchange at surfaces. Dynamics of transport away from the source. Approaches to hazardous waste minimization, resources recovery, remediation, treatment and disposal. Design of selected pathway applications. Bioremediation technologies.

    ENVE 3420 - DESIGN OF AQUEDUCTS AND SANITARY SEWER SYSTEMS
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: CEE 3410

    Water demand calculations. Availability of water. Reservoirs. Distribution reservoirs and service storage. Wells. Types of aqueducts. Distribution systems. Analysis of flow in pipeline networks. Head loss. Design of piping networks. Fundamentals of open channel flow. Wastewater sources and flow rates. Design of sewers and sewer appurtenances. Prevention and control of infiltration and inflow. Occurrence and control of the biological transformations in sewers. Selection, analysis, and design of pumps and pumping stations.

    ENVE 3430 - WATER QUALITY AND TREATMENT
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: CEE 3410 and ENVE 3010

    Physical, chemical, and biological characteristics of water. Drinking Water Standards. Water sources. Characteristics and design of the water treatment processes. Rapid mixing, chemical feeding, flocculation, sedimentation, filtration, disinfection, and other operations and processes. Processing and disposal of sludge generated at the water treatment plants.

    ENVE 3440 - MUNICIPAL WASTEWATER TREATMENT AND DISPOSAL
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: ENVE 3430

    Wastewater sources. Physical, chemical, and biological characteristics of wastewater. Design of wastewater treatment processes: a) preliminary treatment: screening, coarse solids reduction, grit removal, flow equalization, odor control and coagulation/flocculation; b) primary treatment: sedimentation; c) secondary treatment: activated sludge, trickling filters, stabilization ponds, aerated lagoons, and rotating biological contactors; d) advanced treatment: filtration, adsorption, ion exchange, air stripping, nitrification-denitrification, reverse osmosis, microfiltration and ultrafiltration, chemical precipitation, and phosphorus removal. Disinfection. Post-aeration. Effluent disposal and reuse alternatives. Dissolved oxygen sag analysis. Design of facilities for the treatment and disposal of sludge. The Clean Water Act. Regulatory agencies and their requirements.

    ENVE 3450 - GROUNDWATER POLLUTION CONTROL
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: CEE 2110 and ENVE 3430

    Overview of groundwater hydrology. Groundwater pollution sources. Pollutant transport and fate considerations. Flow and solute transport modeling. Pollutant source prioritization. Groundwater monitoring, planning and analysis. Groundwater pollution control: physical, chemical, biological and innovative treatment technologies. Groundwater quality management.

    ENVE 4460 - INDUSTRIAL WASTEWATER TREATMENT, REUSE, AND DISPOSAL
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: ENVE 3440

    Sources and characteristics of industrial wastewaters. Unit operations and processes used in the pre-treatment or treatment of industrial wastewaters: equalization, neutralization, sedimentation, oil separation, flotation, coagulation and chemical precipitation, aeration systems, air stripping, activated sludge, trickling filtration, rotating biological contactors, stabilization basins, anaerobic processes, nutrient removal processes, adsorption, ion exchange, chemical oxidation, filtration, membrane processes, and land treatment. Sludge handling and disposal. Effluent reuse and disposal alternatives. Regulatory agencies and their requirements.

    ENVE 4511 - ENVIRONMENTAL ENGINEERING LABORATORY I
    One credit-hour. Two two-hour lecture and laboratory periods per week.
    Pre-requisite: ENVE 3440

    Laboratory techniques to determine the properties of water and wastewater. Sampling: collection, storage and preservation. Tests for physical characteristics: color, turbidity, temperature and solids content (total, settleable, suspended, volatile and fixed). Tests for chemical characteristics: pH, alkalinity, hardness, chlorine, conductivity, dissolved oxygen, BOD, COD, nitrogen, and phosphorus. Tests for biological characteristics: fecal and total coliform. Other tests such as meteorological factors measurements and jar tests. Experiments focused on process monitoring and control as part of the water resources and environmental engineering design processes.

    ENVE 4513 - ENVIRONMENTAL ENGINEERING LABORATORY II
    One credit-hour. Two two-hour lecture and laboratory periods per week.
    Pre-requisites: ENVE 3220, ENVE 3320, and ENVE 4511

    This course introduces concepts of experimental design applied to environmental engineering. Experiments will include the characterization of dissolved solids in wastewater, the physical characterization of solid wastes, the measurement of chemical properties of soils, and monitoring of particulates in air, soil properties, and activated carbon adsorption. The analysis of experimental data and the preparation of reports will be emphasized.

    ENVE 4610 - ENVIRONMENTAL IMPACT ASSESSMENT
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: ENVE 3220, ENVE 3320, ENVE 3440, and ENVE 3450

    Analysis, evaluation, coordination, and preparation of environmental impact studies. Identification and description of the environmental setting, applicable environmental regulations, impact prediction, evaluation of the impacts, mitigation measures and environmental monitoring. Decision methods for the evaluation of alternatives. Public participation in environmental decision making processes and environmental justice principles.

    ENVE 4710 - POLLUTION PREVENTION ENGINEERING
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: ENVE 3220, ENVE 3320, and ENVE 4460

    An introduction to the theory, principles, and practices related to pollution prevention, environmental legislation, resources usage and conservation, and environmentally benign design for products, processes and manufacturing systems. Environmental impacts of waste from manufacturing operations, and life-cycle assessment that include post-use product disposal, environmental cycles of materials, sustainability, and principles of environmental economics will be thoroughly covered. Principles of process design and economic analysis are integrated in the solution of improved manufacturing processes, and technologies that can be used to minimize pollution. Environmental Accounting and Financial Analysis of pollution prevention projects are presented to assess the effectiveness of proposed process modifications for capital budgeting considerations and managerial decision-making. Several computer projects involving numerical solutions for modification of process design, waste accountability, resource recovery, and financial accounting models are required.

    ENVE 4810 - OCCUPATIONAL SAFETY AND HEALTH
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisites: ENVE 3220 and ENVE 3320

    System safety. Safety management and regulations. Psychology. Industrial hygiene. Ergonomics. Workers compensation. Accident causation and investigation. Fire science. Hazardous materials. Workplace violence. Training.

    ENVE 4911 - ENVIRONMENTAL ENGINEERING SENIOR DESIGN PROJECT I
    One credit-hour. Two two-hour lecture and laboratory periods per week.
    Pre-requisites: ENGI 2260, ENVE 3420, and ENVE 4610

    First part of a two-period open ended design project to correlate all areas of Environmental Engineering to apply, at a high level, the principles of engineering design and science studied in previous courses and to develop awareness of social and economic effects of engineering projects. Projects are equivalent to those normally experienced by a beginning professional. Computer laboratory sessions, oral presentations, and written reports will cover alternatives to be considered at the initial stage of the preliminary design.

    ENVE 4920 – ENVIRONMENTAL ENGINEERING SENIOR DESIGN PROJECT II
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: ENVE 4911

    A continuation of ENVE 4911. Second part of a two-period open ended design project that involves most areas of Environmental Engineering. The project allows correlating the different areas of Environmental Engineering, to apply the principles of engineering design and science at a high level, and to develop awareness of social and economic effects of engineering projects. This second course will concentrate in the detailed analyses and designs required by the specific project, with a clear identification of hypothesis and assumptions, limitations of the study, design criteria, methods and tools, costs, safety, feasibility, and design parameters adopted for each design. Oral presentations and written reports will be used to develop the objectives.

    ENVE 5620 – ENVIRONMENTAL AUDITS
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: ENVE 4610

    This course is an introduction to the principles of environmental auditing and to give to the students experience in the use of key methods and techniques. During the course, students will be able to understand the practice behind environmental management systems, gain experience of carrying out environmental management system techniques in the professional environment and conduct an environmental audit with a partner organization.

    ENVE 5670 – ENVIRONMENTAL REMEDIATION
    Three credit-hours. Two two-hour lecture periods per week.
    Pre-requisite: ENVE 4610

    Environmental remediation, design and applications to emphasize the engineering aspects of using remediation process for the treatment of contaminated soils, sludge, and groundwater. Learn the fundamental techniques for the degradation of hazardous compounds, coupled with design and operational techniques for remediation process. Predict the basic hydrodynamic relationships of contaminant transport phenomena in subsurface environments. Identify the best treatment alternative for each contaminant. Interpret, calculate, and compare alternatives for remediation design.

  • Enrollment


  • ACADEMIC YEAR ENROLLMENT
    2011-2012 161
    2012-2013 148
    2013-2014 137
  • Graduation Data


  • ACADEMIC YEAR DEGREES AWARDED
    2010-2011 21
    2011-2012 17
    2012-2013 18
  • Environmental Engineering : Undergraduate Program
  • Curriculum Sequence
  • FIRST YEAR

    COURSE TITLE CREDIT-HOURS
    MATH 1350 Calculus I 4
    SCIE 1214 General Chemistry I 4
    SCIE 1215 General Chemistry I Lab 0
    CEE 1010 Engineering Graphics For Civil and Environmental Engineers 4
    12


    SECOND QUARTER

    COURSE TITLE CREDIT-HOURS
    MATH 1360 Calculus II 4
    SCIE 1220 General Chemistry II 4
    SCIE 1221 General Chemistry II Laboratory 0
    SCIE 1430 Physics I 4
    SCIE 1431 Physics I Laboratory 1
    ENVE 1011 Introduction to Environmental Engineering 1
    14


    THIRD QUARTER

    COURSE TITLE CREDIT-HOURS
    MATH 1370 Calculus III 4
    SCIE 1230 Organic Chemistry 4
    SCIE 1231 Organic Chemistry Laboratory 0
    SCIE 1440 Physics II 4
    SCIE 1441 Physics II Laboratory 1
    13


    SECOND YEAR
    FIRST QUARTER

    COURSE TITLE CREDIT-HOURS
    MATH 2350 Differential Equations 3
    SCIE 2110 Environmental Microbiology 4
    SCIE 2111 Environmental Microbiology Laboratory 0
    ENGI 2910 Engineering Mechanics-Statics and Dynamics 3
    CEE 2210 Probability and Statistics for Civil and Environmental Engineers 3
    13


    SECOND QUARTER

    COURSE TITLE CREDIT-HOURS
    SPAN 1010 Linguistic Analysis of Literary Genres 3
    ENGI 2420 Fluid Mechanics 3
    CEE 2110 Engineering Geology 3
    CEE 2310 Algorithms, Programming, and Numerical Analysis 3
    CEE 2311 Algorithms, Programming, and Numerical Analysis Laboratory 1
    13


    THIRD QUARTER

    COURSE TITLE CREDIT-HOURS
    SPAN 2020 Business Spanish 3
    ENGL 1010 The Study of the Essay as a Literary Genre 3
    ENGI 2260 Engineering Economics 3
    ENGI 2421 Fluid Mechanics Laboratory 1
    ENGI 2430 Engineering Thermodynamics 3
    13


    THIRD YEAR

    FIRST QUARTER

    COURSE TITLE CREDIT-HOURS
    ENGL 2020 Business English and Communication 3
    CEE 3410 Water Resources and Hydraulic Engineering 3
    ENVE 3010 Environmental Engineering Operations and Processes 3
    ENVE 3110 Environmental Toxicology 3
    12


    SECOND QUARTER

    COURSE TITLE CREDIT-HOURS
    ENVE 3210 Fundamentals of Air Pollution 3
    ENVE 3310 Solid Waste Management 3
    ENVE 3420 Design of Aqueducts and Sanitary Sewer Systems 3
    ENVE 3430 Water Quality and Treatment 3
    12


    THIRD QUARTER

    COURSE TITLE CREDIT-HOURS
    ENVE 3220 Air Pollution Control Design 3
    ENVE 3320 Hazardous Waste Management 3
    ENVE 3440 Municipal Wastewater Treatment and Disposal 3
    ENVE 3450 Groundwater Pollution Control 3
    12


    FOURTH YEAR

    FIRST QUARTER

    COURSE TITLE CREDIT-HOURS
    SOHU 2010 Socio-Humanistic Studies 3
    ENVE 4460 Industrial Wastewater Treatment, Reuse, and Disposal 3
    ENVE 4511 Environmental Engineering Laboratory I 1
    ENVE 4610 Environmental Impact Assessment 3
    10


    SECOND QUARTER

    COURSE TITLE CREDIT-HOURS
    SOHU 2040 Ethics, Global,and Contemporary Issues 3
    ENVE 4513 Environmental Engineering Laboratory II 1
    ENVE 4710 Pollution Prevention Engineering 3
    ENVE 4911 Environmental Engineering Senior Design Project I 1
    Technical Elective 3
    11


    THIRD QUARTER

    COURSE TITLE CREDIT-HOURS
    ENVE 4810 Occupational Safety and Health 3
    ENVE 4920 Environmental Engineering Senior Design Project II3
    Technical Elective 3
    Socio-Humanistic Studies or Language Elective 3
    12


  • Environmental Engineering : Undergraduate Program
  • Laboratories
  • The Environmental Engineering Curriculum requires the following laboratory courses:

    Two General Chemistry and one Organic Chemistry Laboratories,
    Two Physics Laboratories, Environmental Microbiology Laboratory,
    Fluid Mechanics Laboratory, Algorithms, Programming, and Numerical Analysis Laboratory,
    Two Environmental Engineering Laboratories.

    Two additional courses (Introduction to Environmental Engineering and Environmental Engineering Senior Design Project I) also have laboratory experiences. The Civil and Environmental Engineering Department has on campus a Civil and Environmental Engineering Simulations Laboratory.
  • Environmental Engineering : Graduate
  • does not apply - this shouldnt appear

Copyright 2012 - Polytechnic University of Puerto Rico PO Box 192017 San Juan, PR 00919-2017 377 Ponce de Leon Ave. Hato Rey, PR 00918 (787) 622-8000